Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 2 1 2
Re: Receiver Winch Mount [Re: TOY4ICK] #730006 06/11/06 04:29 AM
Joined: Dec 2003
Posts: 836
abnormaltoy Offline
Rock Warrior
Hi,
I don't know if this will help. This is my truck.
[Linked Image]

[Linked Image]

3x5x1/4 tube front and rear. I had it machined to accept the receivers, pressed them in and welded both ends.
Mark

Re: Receiver Winch Mount [Re: TOY4ICK] #730007 06/13/06 04:16 PM
Anonymous
Unregistered
here's the winch mount i just did on my 85

the reciever stock is welded to the stock crossmember then the angle iron gusset plate was welded on.

[Linked Image]
and with the winch mounted
[Linked Image]

Re: Receiver Winch Mount [Re: TOY4ICK] #730008 06/13/06 07:43 PM
Joined: Aug 2001
Posts: 1,520
Robinhood150 Offline
Body Damage is Cool
For those searching in the future, here's mine:
http://www.4x4wire.com/forums/showf...mp;amp;sb=5&o=14&fpart=1


Steve
My Website ||Gettin' off 4wheel drive club member
'93 4Runner V6 4x4 auto tranny
If you have to ask about a SAS, you're not ready for it.
Page 2 of 2 1 2

Moderated by  4Crawler, 4x4Wire, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 2.248s Queries: 16 (0.004s) Memory: 0.5973 MB (Peak: 0.6678 MB) Data Comp: Off Server Time: 2026-06-05 19:32:03 UTC
Valid HTML 5 and Valid CSS