Should I cut a section off the timing belt cover?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Should I cut a section off the timing belt cover? [Re: JLEMOND] #730364 06/12/06 03:45 AM

Joined: Mar 2004

Posts: 558

Prescott AZ USA

94redrodeo Offline

Rock Warrior

I wouldn't do it my friend had a eagle talon and was out rallying and some mud got in a hole in the timing cover and broke the belt and bent the valves.

94 Rodeo 3+3 lift Red)
95.5 Rodeo 1" Body lift Dana 44' front & rear 4.88 gears 35"s 176,000 miles Optima Yellow top InexAir Co2
front winch bumper custom rear bumper, Hella 500's
2004 Silverado duramax

Entire Thread
Subject	Posted By	Posted
Should I cut a section off the timing belt cover?	bob large	06/11/06 09:25 PM
Re: Should I cut a section off the timing belt cover?	JLEMOND	06/12/06 01:47 AM
Re: Should I cut a section off the timing belt cover?	94redrodeo	06/12/06 03:45 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 6.862s Queries: 16 (3.469s) Memory: 0.5970 MB (Peak: 0.6300 MB) Data Comp: Off Server Time: 2026-06-02 16:00:17 UTC
Valid HTML 5 and Valid CSS