V-6 for I-4

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

V-6 for I-4 #730566 06/12/06 05:35 AM

Anonymous

Unregistered

What would it take for a V6 to replace my 2.3L? Would the 5speed tranny mate up to it? Would I need to make new motor mounts? Whole new drive train? Was thinking of replacing my 2.3 for a V-6 (2.8 or 4.3) if it doesn't cost too much on fabrication and such. Any help would be helpful. Thanks!! <img src="/forums/images/graemlins/patriot.gif" alt="" />

Entire Thread
Subject	Posted By	Posted
V-6 for I-4	Anonymous	06/12/06 05:35 AM
Re: V-6 for I-4	mlclark	06/12/06 05:53 AM
Re: V-6 for I-4	Anonymous	06/14/06 07:34 PM
Re: V-6 for I-4	coldrain	06/21/06 10:33 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.595s Queries: 15 (3.593s) Memory: 0.5946 MB (Peak: 0.6275 MB) Data Comp: Off Server Time: 2026-06-06 16:09:05 UTC
Valid HTML 5 and Valid CSS