pulling cylinder head

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

pulling cylinder head #730751 06/13/06 01:20 AM

Anonymous

Unregistered

Are there any tricks or suggestions anyone has on pulling the head off? I need to swap a piston and rod out....any suggestions are welcome

Entire Thread
Subject	Posted By	Posted
pulling cylinder head	Anonymous	06/13/06 01:20 AM
Re: pulling cylinder head	Esquire812	06/13/06 08:15 PM
Re: pulling cylinder head	Anonymous	06/14/06 02:38 AM
Re: pulling cylinder head	Jeffstoyo	06/14/06 08:09 PM
Re: pulling cylinder head	Anonymous	06/17/06 02:14 AM
Re: pulling cylinder head	Jeffstoyo	06/17/06 03:58 AM
Re: pulling cylinder head	Anonymous	06/17/06 05:11 AM
Re: pulling cylinder head	Anonymous	06/17/06 09:49 PM
Re: pulling cylinder head	Jeffstoyo	06/18/06 12:06 AM
Re: pulling cylinder head	motor_head27606	06/18/06 11:23 AM
Re: pulling cylinder head	Anonymous	06/18/06 03:18 PM
Re: pulling cylinder head	XJCreeper	06/18/06 11:16 PM
Re: pulling cylinder head	Anonymous	06/19/06 02:05 AM
Re: pulling cylinder head	XJCreeper	06/19/06 03:39 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.522s Queries: 15 (3.520s) Memory: 0.6165 MB (Peak: 0.6495 MB) Data Comp: Off Server Time: 2026-06-25 10:35:07 UTC
Valid HTML 5 and Valid CSS