|
|
|
|
 Re: Any idea what size bolts are used for stock TJ Skid Plate?
[Re: fidgit]
#730946
06/16/06 06:49 PM
|
Joined: Oct 2003
Posts: 7,768
Web Wheeler
|
fidgit drilling holes in a frame is not hazardous at all. Look at any frame or structure member...holes are common and do not limit the capacity of the frame. Unless of course the holes are waaay oversized. Self tapping screws would, in my opinion, do nothing worth noteing to a frame. Big Jim <img src="/forums/images/graemlins/pfft.gif" alt="" />
professional bovine relocation specialist
|
|
 Re: Any idea what size bolts are used for stock TJ Skid Plate?
[Re: BigJim]
#730947
06/17/06 02:45 AM
|
Joined: Jul 2004
Posts: 105
Wheeler
|
Well one how many self tapping screws have you seen that would hold up the shovel.
And also it is the principle of it I view it right up there with someone lifting up my wifeÆs skirt.
Harmless but you better not do it.
|
|
|
Re: Any idea what size bolts are used for stock TJ Skid Plate?
[Re: fidgit]
#730948
06/17/06 03:02 PM
|
Joined: Oct 2003
Posts: 7,768
Web Wheeler
|
Fidigit I am not argueing it was done correctly! I am taking the side of the tek screws. They are stronger than most folks think. I am sure I would have used the existing crossover holes and done something to support the thing in the normal position. As for your wife? Mine carries a .38! I pity the poor guy that lifts hers. I would like to be around to watch though. Big Jim <img src="/forums/images/graemlins/pfft.gif" alt="" />
professional bovine relocation specialist
|
|
|
Re: Any idea what size bolts are used for stock TJ Skid Plate?
[Re: BigJim]
#730949
06/17/06 08:40 PM
|
Joined: Nov 2005
Posts: 269
OP
Mudrunner
|
So apparently my skid plate is also an integral part of supporting the transmission!
I went to have a new soft top installed today (WOOO!!)
and got my skid plate problems fixed as well. The stock holes where stripped out (rusted out perhaps?) and he welded in some plates, and installed new bolts all the way around. I guess if I hadnt gotten it fixed and the tranny shifted more, it would have royally screwed my TJ. Its all good now :-)
|
|
|
Re: Any idea what size bolts are used for stock TJ Skid Plate?
[Re: BigJim]
#730950
06/17/06 10:00 PM
|
Joined: Jul 2004
Posts: 105
Wheeler
|
LOL <img src="/forums/images/graemlins/kewl.gif" alt="" />
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.008s Queries: 15 (0.005s) Memory: 0.6106 MB (Peak: 0.6911 MB) Data Comp: Off Server Time: 2026-07-13 06:08:58 UTCValid HTML 5 and Valid CSS 