all the rest of the parts I need should show up Friday or early next week. I ended up getting procomp 9000's front and rear. one set are 15" travel eye/eye mounts and the other are some that were made for a lifted dodge ram that (fingers crossed) will hopefully work with my stock mounts. they are about 10" travel stem/eye mounts. I might end up switching them around and using the dodge ones up front w/ the stock shock mount and fabbing new mounts for the rear if I have to, it all depends on what ends up being easiest to do with the time I have left.

rear driveshaft is supposed to be done tomorrow and I'll pick up my yota yokes for the case end of my front shaft. I got the square stock I need for it too. that reminds me I need to order up some u-joints <img src="/forums/images/graemlins/scared.gif" alt="" />

probably tomorrow I'll bribe Eric into welding some gussets on the front suspension hangers and some other stuff. it's amazing what showing up w/ a 12'er can do for ya <img src="/forums/images/graemlins/lol.gif" alt="" />

once the driveshaft is in the back I can go ahead and drive it up some some stuff to check clearances for bumpstop placement and get those rigged up.

better bleed the brakes first, huh? I'll try to remember <img src="/forums/images/graemlins/notooth.gif" alt="" />

I went to go finish up grooving my tires and either I killed the iron or my ext cord is trashed. I hope its just the cord. waiting to see if it heats up as we speak...