Ok if you have it peeled and the little numbered wheels are still in it... Looking closely at the thing you can take the wheels out of the frame and then you can take the stops off of the axel.
You must keep all the wheels in place.. do not let them turn from where they are now. if you start spinning the thing around you will never get the numbers to line back up... so holding the wheels compactly in one hand you will gently turn the one wheel you need turned till your number comes in line. Then put the axel stops back on and reinstall. You can do this on the 2ed or 3rd one for sure... the first one is a learning experience. But it should turn out OK. Remember to only turn the one you want and not the rest or you will have a wave in the numbers when finished.
Big Jim <img src="/forums/images/graemlins/pfft.gif" alt="" />