Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 4 1 2 3 4
LockRight vs. EZ Locker #731747 06/17/06 05:14 AM
Joined: Jun 2006
Posts: 56
fresnodb Offline OP
Getting the Wheeling Fever
How 'bout some opinions, I want to lock the rear of my '93 YJ (2.5 ltr / 5 spd) on a budget and still drive it on the street. I'm set up with 6" of lift and 33" ProComp XTerains with stock gears.


Back in the game!
'94 YJ 2.5 all stock.
Re: LockRight vs. EZ Locker [Re: fresnodb] #731748 06/17/06 05:48 AM
Joined: Oct 2003
Posts: 7,768
BigJim Offline
Web Wheeler
I think they are all bout the same in quality and dependability. The only differences known to me would be the fact that some make a clicking noise when they disconnect themselves and some do not. For this single reason I use the silent ones.
Big Jim <img src="/forums/images/graemlins/pfft.gif" alt="" />


professional bovine relocation specialist
Re: LockRight vs. EZ Locker [Re: fresnodb] #731749 06/17/06 06:20 AM
Joined: Sep 2005
Posts: 1,087
BobRowe Offline
Body Damage is Cool
I don't know anything about EZ Lockers. I have had LockRights in both ends of my CJ-7 with 4.56 gears (rear has a Warn full floater), and have had zero problems with it.

As with any automatic locker in the front, don't engage the front axle if you're on icy roads with reverse camber. That's why an actuated locker (like an Air Locker) is probably better for a vehicle that spends most of its time on the street. -- but you'll pay about twice as much.


1977 CJ-7, fiberglass body, AMC 360 w/ headers, DUI ignition, Edelbrock intake and Holley 4150 carb, TF999, Dana 300, 4.56 gears lockers, York air comp, 4" susp lift, 2" body lift, BFG 35" M-T tires, Megashifter, AGR pump & box, REP8000 winch.
Re: LockRight vs. EZ Locker [Re: BobRowe] #731750 06/18/06 05:09 AM
Anonymous
Unregistered
Lunch boxes are as week as the stock carrier, so get whatever is the cheapest. When I bought my lunchbox, the cheapest was lockrite.

Re: LockRight vs. EZ Locker #731751 06/18/06 10:11 PM
Joined: Jan 2005
Posts: 265
XJCreeper Offline
Mudrunner
Great post <img src="/forums/images/graemlins/cheers.gif" alt="" />. I'm getting ready to put in a lunch box type locker too and was wondering the same as you. The amount of clicking noise is a concern of mine too and I was looking at the Powertrax No-Slip locker over their LockRight. The No-Slip is supposed to be quieter but cost more. Has anyone had experience with both and is it worth the extra cost to get the supposedly quieter and less clicky No-Slip?

Re: LockRight vs. EZ Locker [Re: XJCreeper] #731752 06/18/06 10:36 PM
Joined: Oct 2003
Posts: 7,768
BigJim Offline
Web Wheeler
It is worth the extra cost to me...but not to others. Around town the things click on all turns. When offroading it is not so irritable to most drivers. Depending on your particular ride the clicking can be louder (more noticable) than some other rides.
I use the powertrax and am happy to NOT hear it.
Big Jim <img src="/forums/images/graemlins/pfft.gif" alt="" />


professional bovine relocation specialist
Re: LockRight vs. EZ Locker [Re: XJCreeper] #731753 06/18/06 10:55 PM
Joined: Aug 2003
Posts: 712
john_luttrell Offline
Rock Warrior
I have been running the no-slip in my Toyota for 3 years now and love it. My buddy has a lock right in his jeep and he loves it too. Only difference between the two is the no-slip is a lot quieter; they both handle and perform the exact same.


John Luttrell
2001 4x4 short cab, 3 inch lift with 33 inch mudders and Powertrax no-slip in the rear


1991 Jeep YJ, 4 inch suspension lift on 33" BFG's
Re: LockRight vs. EZ Locker [Re: BigJim] #731754 06/18/06 10:56 PM
Joined: Jan 2005
Posts: 265
XJCreeper Offline
Mudrunner
Thanks BigJim for the low down on the clickity clacking for the PowerTrax. It's been a while since I took a look at both but the price of the two seem to have got alot closer.<img src="/forums/images/graemlins/kewl.gif" alt="" /> At Tellico4x4 the No-Slip for the Chrysler 8.25" is about $85 more than the LockRight. Since I can't put big speakers in the XJ's factory locations I gonna spend to get the quiter locker. <img src="/forums/images/graemlins/lol.gif" alt="" />

Re: LockRight vs. EZ Locker #731755 06/19/06 11:43 PM
Joined: Jun 2006
Posts: 56
fresnodb Offline OP
Getting the Wheeling Fever
Pardon my ignorance, but just what is meant by a "lunch box type locker"???


Back in the game!
'94 YJ 2.5 all stock.
Re: LockRight vs. EZ Locker [Re: fresnodb] #731756 06/20/06 12:43 AM
Joined: Oct 2003
Posts: 7,768
BigJim Offline
Web Wheeler
Generally... Lunchbox referes to any of the self-instsall lockers! They do not need any adjustment and almost anyone can install them.
Big Jim <img src="/forums/images/graemlins/pfft.gif" alt="" />


professional bovine relocation specialist
Page 1 of 4 1 2 3 4

Moderated by  4x4Wire 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.007s Queries: 16 (0.004s) Memory: 0.6359 MB (Peak: 0.7590 MB) Data Comp: Off Server Time: 2026-05-29 23:41:05 UTC
Valid HTML 5 and Valid CSS