so 3 way is the "way" to go. I guess I'll go with 2.5". I already have a 2.5" magnaflow muffler to put on.


So I am down to these two right now: MPE-91006 MPE-94106. They are identical in each characteristic execpt for "GROSS VEHICLE WEIGHT"; on is 4500lbs and the other 6000lbs. Which is the correct choice?

I intend to remove the x-over pipe and run the pass side tube down then x-over under the tranny and reconnect to the single exhaust. Altough this may happen later.

I was on Eielson from 99-06, but now I am in Dayton, Ohio.

Thanks for all the input!