Smitty Bilt Bumper Install

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Smitty Bilt Bumper Install [Re: ClarkGriswold] #732258 06/20/06 04:08 AM

Joined: Oct 2004

Posts: 1,270

Long Island, NY

willzrunna96 Offline

Body Damage is Cool

try taking just the bumper off and leave the brackets on. put the bumper and mark holes in the bracket (if there wide enough and drill new holes. this worked on my aftermarket bumper with 3inch body lift brackets i made

91 pickup 5.29's US GEAR.35x 12.50 trxus m/t.5 speed swap- SOLD!
96 4Runna limited-toytec/OME lift,diff drop Nitto 285/75/16 Elocked=butter
07 FJ cruiser 3" DR coilovers 285/75/16 nitto TG. allpro sliders

Entire Thread
Subject	Posted By	Posted
Smitty Bilt Bumper Install	ClarkGriswold	06/20/06 03:13 AM
Re: Smitty Bilt Bumper Install	4Crawler	06/20/06 03:21 AM
Re: Smitty Bilt Bumper Install	ClarkGriswold	06/20/06 03:26 AM
Re: Smitty Bilt Bumper Install	willzrunna96	06/20/06 04:08 AM
Re: Smitty Bilt Bumper Install	ClarkGriswold	06/20/06 04:41 AM
Re: Smitty Bilt Bumper Install	Paul_H	06/20/06 04:55 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.963s Queries: 16 (3.961s) Memory: 0.6031 MB (Peak: 0.6360 MB) Data Comp: Off Server Time: 2026-11-02 16:42:58 UTC
Valid HTML 5 and Valid CSS