Smitty Bilt Bumper Install

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Smitty Bilt Bumper Install [Re: ClarkGriswold] #732260 06/20/06 04:55 PM

Joined: Dec 2004

Posts: 136

Eagle River, AK

Paul_H

Wheeler

It's been over 10 years since I put my smitty on my truck, but as I recall, it bolts right on with 4 bolts in place of the stock bumper brackets, and no need to drill. I don't recall if the factory bolts were used or not.

'94 extra-cab 3.0 extra slo (auto tranny) original owner. E/B o/s valve heads and no more crossover. More mods to come.

Entire Thread
Subject	Posted By	Posted
Smitty Bilt Bumper Install	ClarkGriswold	06/20/06 03:13 AM
Re: Smitty Bilt Bumper Install	4Crawler	06/20/06 03:21 AM
Re: Smitty Bilt Bumper Install	ClarkGriswold	06/20/06 03:26 AM
Re: Smitty Bilt Bumper Install	willzrunna96	06/20/06 04:08 AM
Re: Smitty Bilt Bumper Install	ClarkGriswold	06/20/06 04:41 AM
Re: Smitty Bilt Bumper Install	Paul_H	06/20/06 04:55 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.264s Queries: 16 (4.261s) Memory: 0.6011 MB (Peak: 0.6340 MB) Data Comp: Off Server Time: 2026-11-04 01:04:29 UTC
Valid HTML 5 and Valid CSS