Replacing clutch slave assembly

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Replacing clutch slave assembly [Re: OTEP] #733016 06/23/06 01:59 PM

Joined: Jul 2004

Posts: 292

East London, South Africa

Boertjie

Mudrunner

If it only lasted "a few years" the bore must be damaged (which in turn damages the rubbers). Or dirt in the reservoir?

Bolt off
bolt on
fill with DOT4
blead (friend/SWAMBO to help here).

1989 Exceed LWB
4m41 (3.2DiD TurboDiesel
5-spd Manual Tranny
2" lift
31" BFG A/T

Entire Thread
Subject	Posted By	Posted
Replacing clutch slave assembly	OTEP	06/23/06 01:38 PM
Re: Replacing clutch slave assembly	Boertjie	06/23/06 01:59 PM
Re: Replacing clutch slave assembly	OTEP	06/23/06 02:14 PM
Re: Replacing clutch slave assembly	Boertjie	06/23/06 02:50 PM
Re: Replacing clutch slave assembly	Boertjie	06/23/06 02:59 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 9.349s Queries: 16 (3.656s) Memory: 0.6014 MB (Peak: 0.6344 MB) Data Comp: Off Server Time: 2026-06-07 03:54:25 UTC
Valid HTML 5 and Valid CSS