Replacing clutch slave assembly

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Replacing clutch slave assembly [Re: Boertjie] #733017 06/23/06 02:14 PM

Joined: Jan 2002

Posts: 1,621

Quezon City, Philippines

OTEP

Body Damage is Cool

For a caveman like me, your instructions were great. Sounds like a simple enough job.

How do I bleed the lower part? Is the bleeder screw the one on the right part of the photo?

Do I also need to bleed the clutch master? And how do I do it?

Entire Thread
Subject	Posted By	Posted
Replacing clutch slave assembly	OTEP	06/23/06 01:38 PM
Re: Replacing clutch slave assembly	Boertjie	06/23/06 01:59 PM
Re: Replacing clutch slave assembly	OTEP	06/23/06 02:14 PM
Re: Replacing clutch slave assembly	Boertjie	06/23/06 02:50 PM
Re: Replacing clutch slave assembly	Boertjie	06/23/06 02:59 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 6.322s Queries: 16 (3.459s) Memory: 0.6026 MB (Peak: 0.6356 MB) Data Comp: Off Server Time: 2026-06-04 03:01:46 UTC
Valid HTML 5 and Valid CSS