Timing chain tensioner

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Timing chain tensioner #733370 06/25/06 10:31 PM

Joined: Jun 2006

Posts: 73

Pensacola, Fl

bodo

Getting the Wheeling Fever

I'm doing a complete rebuild on a 22re, the problem is that when went to put the new tensioner on, the backing plate and oil fitting (the one that looks like a dowel pin) was still in the block. I got the blocking plate off easily but the fitting won't budge. It's not threaded is it?

Entire Thread
Subject	Posted By	Posted
Timing chain tensioner	bodo	06/25/06 10:31 PM
Re: Timing chain tensioner	Jeffstoyo	06/26/06 07:06 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.177s Queries: 15 (4.175s) Memory: 0.5922 MB (Peak: 0.6252 MB) Data Comp: Off Server Time: 2026-07-15 19:59:47 UTC
Valid HTML 5 and Valid CSS