I finished up mounting the receiver and connecting the wiring.

I couldn't get the long, self-tapping screws into the receiver to hold the trailer wiring up on the receiver hitch. I was stripping out the screw heads trying to put them in. I have the wiring plug mounted up internally to the body with zip ties, I can just slide it out when I need it.

Getting the wiring plugged in at the top was another matter. In case anyone wants to use the stock rodeo trailer light wiring harness, here's where I found it....sort of where the instructions say, but not in anyway you can get to it easily.

The directions don't mention two compartments (as you reach up). You can tell there's two compartments--you can see the shadow that forms the larger compartment that you reach into, big enough for my fist. The one you have to reach into for the plugs are barely big enough for your fingers.



And if you don't know what a DJM is, just ask Randii. If he has to click this link, he owes me a beer.