Manifold-back exhaust for 3.0

Print Thread

Rate Thread

Re: Manifold-back exhaust for 3.0 [Re: AlaskaToy] #733668 09/13/06 03:18 AM

Joined: Aug 2003

Posts: 2,854

Toronto, Canada

Greg_Canada Offline

Roll Me Over

Hey bud, did u happen to measure those flanges before you installed it> I need to get some cut out of stainless but i dont want to take my exhaust off to measure them...

89 4Runner
3" BL, M/T locks, 33"bfg mt, bilstein, Kayline, tubebumper, toyotafiberglass panels
TBI: Elocker,3.4 w/ORS,b+b,S2Sstg2cams,arias pistons,P+P intake,TRDs/c,URDpullies+7th,downey headers,MAPECU2,WEGO WB, SupraMAF,walboro255,stg4clutch, EPaOo2 sim

Entire Thread
Subject	Posted By	Posted
Manifold-back exhaust for 3.0	AlaskaToy	06/27/06 01:43 AM
Re: Manifold-back exhaust for 3.0	AlaskaToy	06/27/06 01:44 AM
Re: Manifold-back exhaust for 3.0	AlaskaToy	06/27/06 01:45 AM
Re: Manifold-back exhaust for 3.0	kewlynx	06/27/06 01:55 AM
Re: Manifold-back exhaust for 3.0	AlaskaToy	06/27/06 02:27 AM
Re: Manifold-back exhaust for 3.0	Rauch_Off_Road	06/27/06 03:12 PM
Re: Manifold-back exhaust for 3.0	AlaskaToy	06/27/06 08:12 PM
Re: Manifold-back exhaust for 3.0	Kotrin	07/02/06 01:04 AM
Re: Manifold-back exhaust for 3.0	AlaskaToy	07/01/06 08:42 PM
Re: Manifold-back exhaust for 3.0	AlaskaToy	07/06/06 02:35 AM
Re: Manifold-back exhaust for 3.0	AlaskaToy	09/08/06 03:08 AM
Re: Manifold-back exhaust for 3.0	J94_4runner	09/08/06 03:16 AM
Re: Manifold-back exhaust for 3.0	Anonymous	09/08/06 03:13 PM
Re: Manifold-back exhaust for 3.0	J94_4runner	09/09/06 01:19 AM
Re: Manifold-back exhaust for 3.0	AlaskaToy	09/12/06 11:58 PM
Re: Manifold-back exhaust for 3.0	Greg_Canada	09/13/06 03:18 AM
Re: Manifold-back exhaust for 3.0	AlaskaToy	09/13/06 11:00 PM
Re: Manifold-back exhaust for 3.0	AlaskaToy	09/17/06 05:12 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social: