|
|
Re: Let's talk about deep water
[Re: RobG]
#734125
06/30/06 03:09 PM
|
Joined: Mar 2005
Posts: 245
Wheeler
|
i have been wracking my brain trying to figure out a type of shield after my alt. kicked it last month.
no such luck, suggestions have been to use a type of air filter to cover it, or a rubber bag something like a shower cap, or an actual box built around it to stop the splashes of mud. it seems clean water isn't that bad for it; it's mud. once it gets in the bushes the alt. cans.
|
|
Re: Let's talk about deep water
[Re: rodeoredd]
#734126
06/30/06 04:13 PM
|
Joined: Apr 2002
Posts: 2,529
Roll Me Over
|
There are two types of snorkels that can fit. The type I got the Safari Snorkel that I got through Matt for about 300 bucks. Part number HS100HF It's not too bad of an install. The template won't work because it's not made for our trucks. The only modification necessary to make it fit is you have to cut the inner fender section and take some material out of it because it's too long and hits the back fo the turn signal. Ok, the other one that will work you can get from TJM. But I think it's really high like $600+ http://www.tjmproducts.com.au/brochures/rodeo.pdfYou need to paste this into the browser. Scroll down to the red pickup, there are two different models. They are not cheap. Joe
A gun in the hand is better than a cop on the phone.
98 Passport 33's, Supercharged, Calmini Bumper, rockbars, diff drops, Teralows, 4.77's, Aussie and ARB lockers, Safari snorkel, Optima red top.
|
|
Re: Let's talk about deep water
[Re: Bigpoppax2]
#734127
06/30/06 05:02 PM
|
Joined: Sep 2003
Posts: 1,871
Body Damage is Cool
|
Yeah we were quoted like $650 for the tjm shipped by air. It would have been like $200 cheaper for them to ship it on a boat, but they said that could take 6 months <img src="/forums/images/graemlins/zombie.gif" alt="" />. My brother still might get it though.
The reason I got my snorkel was that I went through deep water a few times an injested some water, and scared the crap out of me. I've had my engine submerged quite a bit, my altnator has been fine so far. But I've only gone through clean water, not muddy dirty water.
The only problems I have when water fording are my distributer(sp?) Its not 100% sealed, and my motor kind of studders when it gets wet. The other thing is my exhaust, I've put a custom bigger than factory exhaust, and my little motor doesn't have enough back pressure to keep water out. So I've got to figure those few things out before I go in deep water again. But I'm impressed with my trooper so far with the snorkel, I've had my trooper floating with the engine still running. I did have my smog pump seize up on me though. <img src="/forums/images/graemlins/shiner.gif" alt="" />
89 trooper, tera low t-case gears,5.38's, 3" indy4xsus lift3"body lift,safari snorkle,warn winch,custom bull bar,custom rock sliders,warn hubs,35x13.50r15,custom rear bumper trooper pics
|
|
Re: Let's talk about deep water
[Re: Bigpoppax2]
#734128
06/30/06 05:38 PM
|
Joined: Sep 2002
Posts: 1,067
OP
Body Damage is Cool
|
The TJM snorkel said it was a Pathfinder. Do they make one for the Rodeo, or do you have to adapt?
Pete
'01 Rodeo Sport, 5 Speed Softie, Indy 4X rocker bars, OME 912's, Rancho 9000X's, Superwinch hubs, custom tube bumper with Warn 9000i , Flowmaster 50, TeraLow t-case gears, ARB front & rear lockers, TrXus MT's, Sway bar disconnects
|
|
Re: Let's talk about deep water
[Re: TrailMystic]
#734129
06/30/06 05:50 PM
|
Joined: Sep 2003
Posts: 1,871
Body Damage is Cool
|
The tjm is made for a holden rodeo. Its for a R9 v6 holden rodeo. You can call tjm and get a exact quote. here are a few pics. LINK
Last edited by mlclark; 07/03/06 04:13 AM.
89 trooper, tera low t-case gears,5.38's, 3" indy4xsus lift3"body lift,safari snorkle,warn winch,custom bull bar,custom rock sliders,warn hubs,35x13.50r15,custom rear bumper trooper pics
|
|
Re: Let's talk about deep water
[Re: onebadtrooper]
#734130
07/01/06 05:35 AM
|
Joined: Apr 2004
Posts: 457
Mudrunner
|
If you want to see deep, i have one of ONEBADTROOPER in 3+ feet of water. I will host it real quick.
92 Galant VR4 #501/1k - Turbo, All Wheel Drive with 4 wheel steering - Money eatin toy 89 Isuzu I-Mark RS sings to 7800 RPM - Daily Driver
|
|
Re: Let's talk about deep water
[Re: TrailMystic]
#734131
07/01/06 05:41 AM
|
Joined: Apr 2004
Posts: 457
Mudrunner
|
|
92 Galant VR4 #501/1k - Turbo, All Wheel Drive with 4 wheel steering - Money eatin toy 89 Isuzu I-Mark RS sings to 7800 RPM - Daily Driver
|
|
Re: Let's talk about deep water
[Re: TrailMystic]
#734132
07/03/06 03:54 AM
|
Joined: May 2002
Posts: 36
Getting the Wheeling Fever
|
could you put a container around the alternator and pressurize it with an air source? it would keep air flowing (though limited) and water out. it wouldn't be permanent, just slipped on prior to major water crossings.
i was just wondering if that was possible or feasible. i do well to change my own oil so i possess no mechanical skills or ablity but was just curious about the idea.
joel
joel s. '01 trooper (the misses') and 265/75/16/C dueler AT '95 f150 4x4, leveling coils and 32 inch maxxiss buckshots
|
|
Re: Let's talk about deep water
[Re: TrailMystic]
#734133
07/04/06 01:14 AM
|
Joined: Sep 2002
Posts: 1,067
OP
Body Damage is Cool
|
I kinda like the tjm snorkel. Maybe I'll order one now and get it by Christmas (by boat).
I have noticed one new sound since I did the deep water. It's kinda of a singing sound (not too loud) and it does it more at higher rpm. Hopefully I haven't messed up the alternator bearings.
Pete
'01 Rodeo Sport, 5 Speed Softie, Indy 4X rocker bars, OME 912's, Rancho 9000X's, Superwinch hubs, custom tube bumper with Warn 9000i , Flowmaster 50, TeraLow t-case gears, ARB front & rear lockers, TrXus MT's, Sway bar disconnects
|
|
Re: Let's talk about deep water
[Re: TrailMystic]
#734134
07/04/06 01:22 AM
|
Joined: Apr 2000
Posts: 7,268
Isuzu Moderator
|
Hopefully I haven't messed up the alternator bearings.
Hope harder. <img src="/forums/images/graemlins/smile.gif" alt="" /> That is pretty much the siren song of dying alt bearing/bushings.
Michael
|
|
|
|