Automatic shift linkage and 3" BL

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Automatic shift linkage and 3" BL [Re: TyzToyz] #734381 07/06/06 07:57 PM

Anonymous

Unregistered

I have a v6 auto, I had to cut the link a add about 1/2 to it for the body lift, plus chain the motor mounts and trans mount. the drive shaft flang would move up and hit the linkage knocking it out of 4/L into 4/H.
Hope this helps
Steve

Entire Thread
Subject	Posted By	Posted
Automatic shift linkage and 3" BL	TyzToyz	06/29/06 08:39 AM
Re: Automatic shift linkage and 3" BL	4Crawler	06/29/06 12:45 PM
Re: Automatic shift linkage and 3" BL	5VZ	07/03/06 07:22 PM
Re: Automatic shift linkage and 3" BL	willzrunna96	07/03/06 10:58 PM
Re: Automatic shift linkage and 3" BL	TyzToyz	07/04/06 08:11 PM
Re: Automatic shift linkage and 3" BL	4Crawler	07/04/06 08:55 PM
Re: Automatic shift linkage and 3" BL	Anonymous	07/06/06 07:57 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.513s Queries: 16 (3.511s) Memory: 0.6014 MB (Peak: 0.6344 MB) Data Comp: Off Server Time: 2026-06-17 10:57:09 UTC
Valid HTML 5 and Valid CSS