Carburetor Jetting question..

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Carburetor Jetting question.. #735218 07/03/06 09:41 PM

Joined: Mar 2006

Posts: 73

Kotrin

Getting the Wheeling Fever

So I just got my exhaust done on my 1987 Toyota Pickup with the 22R, and i got a better flowing Air, should I re-jet the carburetor to allow it to give a better mixture and if so what jet size does one normally use? I've done it on my banshee, but that was a little easier then this, hehe. Dont wanna put the wrong jet in and cause things to go haywire, if ya know what i mean.

- Kotrin

Entire Thread
Subject	Posted By	Posted
Carburetor Jetting question..	Kotrin	07/03/06 09:41 PM
Re: Carburetor Jetting question..	Kotrin	07/04/06 04:59 AM
Re: Carburetor Jetting question..	ArbitraryNotion	07/04/06 07:02 PM
Re: Carburetor Jetting question..	kyle-22r	07/05/06 02:52 AM
Re: Carburetor Jetting question..	Kotrin	07/05/06 04:37 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.590s Queries: 15 (3.588s) Memory: 0.5991 MB (Peak: 0.6321 MB) Data Comp: Off Server Time: 2026-06-08 23:02:53 UTC
Valid HTML 5 and Valid CSS