YJ Rear shock mount

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: YJ Rear shock mount [Re: fresnodb] #735414 07/05/06 04:47 PM

Anonymous

Unregistered

If the upper and lower mount aren't within about 1/8" you will bend shocks. I think the spring plate might offset it too far.

Entire Thread
Subject	Posted By	Posted
YJ Rear shock mount	fresnodb	07/05/06 12:42 AM
Re: YJ Rear shock mount	Anonymous	07/05/06 04:47 PM
Re: YJ Rear shock mount	Anonymous	07/07/06 11:50 PM
Re: YJ Rear shock mount	Anonymous	07/11/06 05:19 PM
Re: YJ Rear shock mount	Mudlover27	07/12/06 08:40 PM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.556s Queries: 16 (3.554s) Memory: 0.5957 MB (Peak: 0.6287 MB) Data Comp: Off Server Time: 2026-06-17 10:19:12 UTC
Valid HTML 5 and Valid CSS