Quote
I also used a small hammer to flatten out the areas around the bolt holes in the pan.
This is the reason for most of the leaks, people do not do this. I have a small metal bar that I use as a dolly on the other side. This needs to be done if you use FIPG or it calls for a cork gasket. Also on cork gaskets, I always soak them in water to make them pliable.

David Fritzsche
1990 Ex-Cab V-6,5-speed, with a few mods
04.5 CTD Dodge 2500 Ram--Tow Rig
Roseville, CA

"Serenity through Sobriety"