crankshaft sprocket removal on 3.5 dohc

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: crankshaft sprocket removal on 3.5 dohc [Re: jaco] #736004 07/07/06 01:18 PM

Joined: Apr 2002

Posts: 3,622

Brookfield, WI

NathanC

Roll Me Over

I pulled mine off with a gear puller and very light heat. A couple taps with a piece of brass stock and it came right off. It was pretty easy considering the engine was outside the vehicle <img src="/forums/images/graemlins/baby.gif" alt="" />.

'06 Dakota QC 4.7 6sp 4x4
'88 Mighty Max
'77 KZ1000 fun old bike

Entire Thread
Subject	Posted By	Posted
crankshaft sprocket removal on 3.5 dohc	jaco	07/07/06 08:06 AM
Re: crankshaft sprocket removal on 3.5 dohc	NathanC	07/07/06 01:18 PM
Re: crankshaft sprocket removal on 3.5 dohc	jaco	07/10/06 05:54 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 5.051s Queries: 16 (5.048s) Memory: 0.5954 MB (Peak: 0.6283 MB) Data Comp: Off Server Time: 2026-06-23 14:07:16 UTC
Valid HTML 5 and Valid CSS