4.0 knocking at only 84,000mi?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 4.0 knocking at only 84,000mi? [Re: no_hank] #736448 07/10/06 06:49 AM

Anonymous

Unregistered

You were running a performance chip and a K&N filter? You need to run a compression check. It only took 60K miles on my jeep to get almost .025" worth of wear running a K&N. Mixed with an aggressively timed over rich engine from a chip, the engine might be wearing quickly.

Entire Thread
Subject	Posted By	Posted
4.0 knocking at only 84,000mi?	no_hank	07/09/06 11:34 PM
Re: 4.0 knocking at only 84,000mi?	no_hank	07/09/06 11:55 PM
Re: 4.0 knocking at only 84,000mi?	BigJim	07/10/06 02:13 AM
Re: 4.0 knocking at only 84,000mi?	80CJ	07/10/06 01:00 AM
Re: 4.0 knocking at only 84,000mi?	Anonymous	07/10/06 06:49 AM
Re: 4.0 knocking at only 84,000mi?	no_hank	07/12/06 08:05 PM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.808s Queries: 16 (3.806s) Memory: 0.5998 MB (Peak: 0.6328 MB) Data Comp: Off Server Time: 2026-06-12 10:22:27 UTC
Valid HTML 5 and Valid CSS