'87 Cherokee driveline vibration

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: '87 Cherokee driveline vibration [Re: mmcpeck] #736917 07/12/06 10:08 PM

Anonymous

Unregistered

It should hold....

You should be able to do pull ups on the shaft without any noticeable play in the u-joint. Also you should be able to put a huge pipe wrench on the shaft and yank away without any joint problems.

Entire Thread
Subject	Posted By	Posted
'87 Cherokee driveline vibration	mmcpeck	07/12/06 01:25 AM
Re: '87 Cherokee driveline vibration	BigJim	07/12/06 03:45 AM
Re: '87 Cherokee driveline vibration	mmcpeck	07/12/06 08:31 PM
Re: '87 Cherokee driveline vibration	Bigbird79	07/12/06 08:48 PM
Re: '87 Cherokee driveline vibration	mmcpeck	07/12/06 09:13 PM
Re: '87 Cherokee driveline vibration	Anonymous	07/12/06 10:08 PM
Re: '87 Cherokee driveline vibration	Bigbird79	07/12/06 10:42 PM
Re: '87 Cherokee driveline vibration	mmcpeck	07/12/06 11:27 PM
Re: '87 Cherokee driveline vibration	BigJim	07/12/06 11:50 PM
Re: '87 Cherokee driveline vibration	BigJim	07/12/06 11:09 PM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.500s Queries: 16 (3.498s) Memory: 0.6100 MB (Peak: 0.6429 MB) Data Comp: Off Server Time: 2026-06-21 12:29:25 UTC
Valid HTML 5 and Valid CSS