holy smokes <img src="/forums/images/graemlins/scared.gif" alt="" />.....did they pull it out from the rear?

i have never seen anything like that in my whole life. i would be crushed if that was my truck.

Yep couldn't pull me forward my front end was pinned against the bank. Im just happy to have it home. No one got hurt my Zuk built diffy is still fine. So everythings ok. Just happy to not have to be stressed about my truck being off in some swamp.

Thank god the diff is ok <img src="/forums/images/graemlins/kewl.gif" alt="" /> <img src="/forums/images/graemlins/kewl.gif" alt="" /> <img src="/forums/images/graemlins/kewl.gif" alt="" /> <img src="/forums/images/graemlins/cheers.gif" alt="" />ZUK <img src="/forums/images/graemlins/shiner.gif" alt="" />

Wow, that does suck really bad. Not to minimize anything, but on the bright side, if the frame is not too damaged, engine and tranny aside, it looks repairable. Is the axle completely bent and gone? If not, they're easily rebuildable.

Sorry man, wish I had something better to say.

im not sure how bent the axle is.. there was an awfull lotta torque on the driverside knuckle and somehow the caliper got ripped off. It looks semi strait but i donno how much damage there is till i take it apart. the shock mount was ripped off but those are easly replaceable. i have anouther housing im not overly worryed about that. My frame is done for. its bent and theres to much rust damage to make it worth trying to fix it. motor... well screw it its a 3.0 pos i dont want it anyways. leafsprings hate leafs im gunna make a 3 link front and 4 link rear. so pretty much im back to rebuilding a rig but at least i already know what im gunna do for the most part. though... i havnt decided if im gunna get rid of these toy axles n get 60s or what.

I feel that i must add, Allpro leafs suck balls. considering they were the first thing to tear apart... Oh and their tie rods too <img src="/forums/images/graemlins/frown.gif" alt="" />.

heh its prolly just me though <img src="/forums/images/graemlins/rolleyes.gif" alt="" />

oh my god, I feel so bad for you. Makes me sick looking at those pics. Here I am worried about my dumb ass carb not working right and your truck is torn in half. I cant believe how stuck your truck must have been. How did you get it in there? Is that a trail you take normally? I know PA got alot of rain in the past two weeks. Were you hung up on some rocks under there? What was the winch hooked to when this happened? Good luck with everything, and once again Im sorry for your loss. Stinson

Hey dude dont get pissy with me because you lisined to some girls about the trail and wanted to show off.... and ya i have see stucks way worse than that..and used way more equipment thatn that to get them out... what were you expecting using a 30T winch ? just to rip of the bumper!!!

Salvo, nice hit him when hes down. No feeling for the poor guy?

Wow, that's all there really is to say looking at those pics! Id definatly cry like a little kid if that was mine. It hurts to even look at it actually.

Im very impressed how well you seem to be taking it though and its a great excuse to build it up even better than before. Education isnt cheap and Im sure you learned quite a few things other than the AllPro leaves aren't a match for that huge winch.