|
|
|
|
Rotor Replacement 3rd Gen 4 Runner
#738067
07/17/06 09:27 PM
|
Joined: Mar 2001
Posts: 100
OP
Wheeler
|
I did do a quick search but I couldn't find anything on the rotor replacement for a 3rd Gen.
I'm thinking it is time, and if it is not too difficult I would like to attempt it myself.
Does anyone know of a write up somewhere on how this is done?
I had a 92 before, and I was told I would have to remove the front hub to do the job. Same with the 3rd gen?
Thanks for the help. This site is really a great source of info.
Tommy
Tom P 2000 4runner 5spd SR5 (pretty much stock) Bridgstone REVO(275/70r16)
|
|
Re: Rotor Replacement 3rd Gen 4 Runner
[Re: Tommytuttle]
#738068
07/18/06 03:01 AM
|
Joined: Jun 2001
Posts: 1,466
Body Damage is Cool
|
It's easier on a 3rd gen. Remove the wheel and pads. Remove the two large bolts holding the caliper on. Use a bungee to hold the caliper up and then just remove the rotor. The correct way to install new rotors is to check the runout with a dial gauge, if you don't have one it should be ok.
Milan _ _ _ _ _ _ __ _ _ _ _ _ _ Support our troops!
'98 4R Limited '82 Toy 4.3 TBI sold
|
|
Re: Rotor Replacement 3rd Gen 4 Runner
[Re: Tommytuttle]
#738069
07/18/06 03:44 AM
|
Joined: Oct 2002
Posts: 15,887
Toyota & Classifieds Moderator
|
Go to the Toyota section above, and look for the front end maintenance article there.
Also, there are a couple FSM's sticky'd in the Taco section that'll help you with the later model rigs. Your hubs will be different between this and your old 92, so that's key.
http://www.walkablecommunities.org/Democracy is two wolves and a lamb voting on what to have for dinner. Liberty is a well-armed lamb contesting the vote. **ubi apis- ibi salus**
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5923 MB (Peak: 0.6455 MB) Data Comp: Off Server Time: 2026-06-17 15:01:44 UTCValid HTML 5 and Valid CSS