|
|
|
|
 questions concerning axles
#738657
07/19/06 09:04 PM
|
Joined: Jul 2005
Posts: 75
OP
Getting the Wheeling Fever
|
I have a jeep cj7 1885 model four inches of lift 33" BFGs stock 6 cylindar motor. What I am needing to know is info on upgrades for the stock AMC 20 and the Front DANA 30. I would like to go with a one piece axle in the back with 4.56's and a locker. What is your reccomendation or what has worked best for you. In the front I would like to go with 4.56's as well with a locker. What is your recomendation or what has worked best for you? Any advise would be appreciated. Thanks in advance <img src="/forums/images/graemlins/patriot.gif" alt="" /> <img src="/forums/images/graemlins/cheers.gif" alt="" />
|
|
|
Entire Thread
|
questions concerning axles
|
Greg2000
|
07/19/06 09:04 PM
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 3.530s Queries: 15 (3.528s) Memory: 0.5917 MB (Peak: 0.6247 MB) Data Comp: Off Server Time: 2026-07-17 05:53:27 UTCValid HTML 5 and Valid CSS 
