|
|
|
|
 What size are those rotten torx bolts on my bellhousing?
#738962
07/20/06 07:45 PM
|
Joined: Oct 2004
Posts: 44
OP
Getting the Wheeling Fever
|
Hi guys, We're replacing the clutch in my 91 yj this weekend and I need to know what size those 2 E type torx bolts on the top of the bellhousing are so that I can run to the parts store and tell the pimple faced kid at the counter what I need.
Thanks again in advance.
91 yj with a 97 xj 4.0 motor and stock 5 speed.
|
|
 Re: What size are those rotten torx bolts on my bellhousing?
[Re: wyojeeper]
#738963
07/20/06 08:00 PM
|
Joined: Oct 2003
Posts: 7,768
Web Wheeler
|
Hmmm I have replaced them with a bolt with a 7/16 head on it. I had to BEND a wrench to get to them from the top! Much easier to work with from up there. Big JIm <img src="/forums/images/graemlins/pfft.gif" alt="" />
professional bovine relocation specialist
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5865 MB (Peak: 0.6343 MB) Data Comp: Off Server Time: 2026-06-17 05:32:16 UTCValid HTML 5 and Valid CSS 
