What size are those rotten torx bolts on my bellhousing?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

What size are those rotten torx bolts on my bellhousing? #738962 07/20/06 07:45 PM

Joined: Oct 2004

Posts: 44

Casper, Wyoming

wyojeeper

Getting the Wheeling Fever

Hi guys, We're replacing the clutch in my 91 yj this weekend and I need to know what size those 2 E type torx bolts on the top of the bellhousing are so that I can run to the parts store and tell the pimple faced kid at the counter what I need.
Thanks again in advance.
91 yj with a 97 xj 4.0 motor and stock 5 speed.

Entire Thread
Subject	Posted By	Posted
What size are those rotten torx bolts on my bellhousing?	wyojeeper	07/20/06 07:45 PM
Re: What size are those rotten torx bolts on my bellhousing?	BigJim	07/20/06 08:00 PM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.511s Queries: 15 (3.509s) Memory: 0.5937 MB (Peak: 0.6267 MB) Data Comp: Off Server Time: 2026-06-21 14:41:30 UTC
Valid HTML 5 and Valid CSS