What size are those rotten torx bolts on my bellhousing?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: What size are those rotten torx bolts on my bellhousing? [Re: wyojeeper] #738963 07/20/06 08:00 PM

Joined: Oct 2003

Posts: 7,768

Central Texas

BigJim

Web Wheeler

Hmmm I have replaced them with a bolt with a 7/16 head on it. I had to BEND a wrench to get to them from the top! Much easier to work with from up there.
Big JIm <img src="/forums/images/graemlins/pfft.gif" alt="" />

professional bovine relocation specialist

Entire Thread
Subject	Posted By	Posted
What size are those rotten torx bolts on my bellhousing?	wyojeeper	07/20/06 07:45 PM
Re: What size are those rotten torx bolts on my bellhousing?	BigJim	07/20/06 08:00 PM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.564s Queries: 16 (3.562s) Memory: 0.5938 MB (Peak: 0.6268 MB) Data Comp: Off Server Time: 2026-06-18 04:02:40 UTC
Valid HTML 5 and Valid CSS