york air conditioning compressor serpentine clutch pulley needed

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: york air conditioning compressor serpentine clutch pulley needed [Re: wyojeeper] #738966 07/21/06 02:23 AM

Anonymous

Unregistered

Jim he's looking for a serpentine pulley to replace the vbelt pulley on a compressor. Everything else is serpentine already.

Most big rig shops carry serpentine pulleys for these. A Kenworth part number is KA-1480 for a six groove pulley or KA-1485 for an eight groove pulley. They run $85-100 new. Freightliner, Peterbilt, and others also will have them.

Some mid-80s Mustangs had Yorks w/serpentine pulleys but they are rare. You might also find a serpentine Volvo.

Entire Thread
Subject	Posted By	Posted
york air conditioning compressor serpentine clutch pulley needed	wyojeeper	07/20/06 07:48 PM
Re: york air conditioning compressor serpentine clutch pulley needed	BigJim	07/20/06 07:59 PM
Re: york air conditioning compressor serpentine clutch pulley needed	Anonymous	07/21/06 02:23 AM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.528s Queries: 16 (3.526s) Memory: 0.5938 MB (Peak: 0.6268 MB) Data Comp: Off Server Time: 2026-06-16 08:24:41 UTC
Valid HTML 5 and Valid CSS