Electrical Question - Power windows

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Electrical Question - Power windows [Re: TyzToyz] #739027 07/21/06 12:09 AM

Joined: Jan 2000

Posts: 12,153

N. California. USA

4Crawler

Web Wheeler

I would pull the switches out and check/clean them out well. Both window circuits pass through the driver's side contacts, so if they are dirty, neither side will work. If you have power at the relay, then the fusible link it fine.

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code

Entire Thread
Subject	Posted By	Posted
Electrical Question - Power windows	TyzToyz	07/20/06 11:59 PM
Re: Electrical Question - Power windows	4Crawler	07/21/06 12:09 AM
Re: Electrical Question - Power windows	TyzToyz	07/21/06 01:22 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 8.483s Queries: 16 (3.459s) Memory: 0.5991 MB (Peak: 0.6321 MB) Data Comp: Off Server Time: 2026-06-20 16:43:17 UTC
Valid HTML 5 and Valid CSS