Engine swap 2.3L to 2.8L

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Engine swap 2.3L to 2.8L [Re: Jayson1] #739037 07/21/06 01:34 AM

Joined: May 2002

Posts: 1,541

CleveTown

jezeric

Isuzu Moderator

Totally different creature. You're talking new tranny/transfer case, motor mounts, fuel pump, etc..

It can be done, but it's not going to be a bolt in swap by any means.

Entire Thread
Subject	Posted By	Posted
Engine swap 2.3L to 2.8L	Jayson1	07/21/06 01:17 AM
Re: Engine swap 2.3L to 2.8L	jezeric	07/21/06 01:34 AM
Re: Engine swap 2.3L to 2.8L	Jayson1	07/21/06 03:56 AM
Re: Engine swap 2.3L to 2.8L	Richard Saylor	07/21/06 04:02 AM
Re: Engine swap 2.3L to 2.8L	Jayson1	07/21/06 04:58 AM
Re: Engine swap 2.3L to 2.8L	Ed Mc	07/21/06 05:04 AM
Re: Engine swap 2.3L to 2.8L	Jayson1	07/21/06 08:57 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.531s Queries: 16 (3.529s) Memory: 0.6037 MB (Peak: 0.6367 MB) Data Comp: Off Server Time: 2026-06-22 19:18:50 UTC
Valid HTML 5 and Valid CSS