Engine swap 2.3L to 2.8L

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Engine swap 2.3L to 2.8L [Re: Richard Saylor] #739040 07/21/06 04:58 AM

Joined: Jul 2006

Posts: 30

Muscadine, AL

Jayson1

Getting the Wheeling Fever

My bad a 2.6L 4cyl <img src="/forums/images/graemlins/smile.gif" alt="" />

87 Tropper II, Supewinch Hubs, First big 4x4 test: pulled a 84 Mercury out of a muddy ditch while in park.

Entire Thread
Subject	Posted By	Posted
Engine swap 2.3L to 2.8L	Jayson1	07/21/06 01:17 AM
Re: Engine swap 2.3L to 2.8L	jezeric	07/21/06 01:34 AM
Re: Engine swap 2.3L to 2.8L	Jayson1	07/21/06 03:56 AM
Re: Engine swap 2.3L to 2.8L	Richard Saylor	07/21/06 04:02 AM
Re: Engine swap 2.3L to 2.8L	Jayson1	07/21/06 04:58 AM
Re: Engine swap 2.3L to 2.8L	Ed Mc	07/21/06 05:04 AM
Re: Engine swap 2.3L to 2.8L	Jayson1	07/21/06 08:57 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.527s Queries: 16 (3.525s) Memory: 0.6053 MB (Peak: 0.6383 MB) Data Comp: Off Server Time: 2026-06-11 23:34:46 UTC
Valid HTML 5 and Valid CSS