|
|
|
|
Re: Removing the Speed governor
[Re: Taco2000GT]
#739394
07/23/06 12:35 AM
|
Joined: Aug 2003
Posts: 712
Rock Warrior
|
I don't mean to sound like anyoneÆs "father" or "family mechanic"; however, disconnecting the speed sensor on a computer controlled vehicle is a very bad thing to do. The speed signal is an intricate part of the equation the computer uses to decide on the final fuel trim. With out it the computer will become confused every time you change the throttle setting and cause very poor drivability. Also it amazes me that any speed demon would buy a Tacoma; it's not built for speed and therefore, it will not do anything "fast" very well. I'm not against a little speed thrill now and then if practiced safely; but I practice that on a motorcycle that is built for a little speed.
John Luttrell 2001 4x4 short cab, 3 inch lift with 33 inch mudders and Powertrax no-slip in the rear
1991 Jeep YJ, 4 inch suspension lift on 33" BFG's
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 3.871s Queries: 16 (3.868s) Memory: 0.6012 MB (Peak: 0.6342 MB) Data Comp: Off Server Time: 2026-11-05 01:29:40 UTCValid HTML 5 and Valid CSS