ok I looked at the choke and its open and working just fine with the pull cable and cycles with no problem, now go ahead and slap me here but I could rebuild a Holley asleep and hogged tied and I assume to remove the top of the 2100 its just the 4 flat head screws there by the bowl and front top of the carb, and how do you adjust the bowl on this thing I mean I figure its just like any other carb but if you look straight down on this carb there is a big flat head screw in there by the float now is that to adjust or is is a screen type filter (keep in mind I have not touched anything yet want all my ducks in a row before i f*ck this up hahahaha) well i'll check back in the morning and see what needs to get done.
<img src="/forums/images/graemlins/confused.gif" alt="" /> <img src="/forums/images/graemlins/scared.gif" alt="" /> <img src="/forums/images/graemlins/cheers.gif" alt="" /> <img src="/forums/images/graemlins/cheers.gif" alt="" /> <img src="/forums/images/graemlins/drunk.gif" alt="" /> <img src="/forums/images/graemlins/barf.gif" alt="" /> <img src="/forums/images/graemlins/zombie.gif" alt="" />