|
|
|
|
 Re: Smells like tranny oil inside??
[Re: oldsub86]
#740050
07/26/06 06:12 AM
|
Joined: Apr 2000
Posts: 4,230
Roll Me Over
|
Good idea to check the transfer case output. We did have a leak there and just replaced the seal. However, I recall having read that one should put some RTV somewhere on there and I know I did not do that. Anyone remember the post on this? This has been posted many times and it was one thing Marlin told me to make sure I do. I just wiped black FIPG on the splines on the inside of the flange. What ever pooped out I left and stuck the washer and nut on. No leaks so far and I did that at least four years ago.
David Fritzsche
1990 Ex-Cab V-6,5-speed, with a few mods
04.5 CTD Dodge 2500 Ram--Tow Rig
Roseville, CA
"Serenity through Sobriety"
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.008s Queries: 16 (0.005s) Memory: 0.5858 MB (Peak: 0.6414 MB) Data Comp: Off Server Time: 2026-06-18 20:11:30 UTCValid HTML 5 and Valid CSS 
