Brake Job Q's

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Brake Job Q's [Re: HawkFanatic] #740486 07/26/06 07:40 PM

Joined: May 2006

Posts: 146

Washington state

Jeffstoyo

Wheeler

You take the dial off and then the hub body comes off as a whole off of the rotor. Not difficult at all. You will need a large socket for the wheel bearings, I think it is a 54mm or 2 1/8" size.
Jeff

It's all good!
83 Shortbed stepside lots of mods
82 Shortbed fully restored
85 Shortbed daily driver
88 4-runner-Wife's daily driver

Entire Thread
Subject	Posted By	Posted
Brake Job Q's	HawkFanatic	07/26/06 05:48 PM
Re: Brake Job Q's	Jeffstoyo	07/26/06 07:40 PM
Re: Brake Job Q's	4Crawler	07/26/06 07:54 PM
Re: Brake Job Q's	RatLabGuy	07/27/06 01:07 AM
Re: Brake Job Q's	kewlynx	07/27/06 04:01 AM
Re: Brake Job Q's	RatLabGuy	07/27/06 05:32 PM
Re: Brake Job Q's	HawkFanatic	07/27/06 05:33 PM
Re: Brake Job Q's	Jeffstoyo	07/27/06 11:06 PM
Re: Brake Job Q's	Anonymous	07/28/06 01:32 AM
Re: Brake Job Q's	missouriman	07/28/06 02:06 AM
Re: Brake Job Q's	eightyeight	07/28/06 04:14 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.601s Queries: 16 (3.598s) Memory: 0.6148 MB (Peak: 0.6478 MB) Data Comp: Off Server Time: 2026-06-22 19:09:00 UTC
Valid HTML 5 and Valid CSS