Brake Job Q's

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Brake Job Q's #740494 07/28/06 02:06 AM

Joined: Dec 2000

Posts: 882

Black Hills of South Dakota

missouriman Offline

Rock Warrior

save your self some time and take the rotors to a machine shop to press out the old studs and press them back in with the new rotors.
even with a brass drift I have messed up the studs.
even using a brass hammer as a drift, much easier on the hands.
also you can't or should not use the lug nuts to try and pull the studs back in.

Entire Thread
Subject	Posted By	Posted
Brake Job Q's	HawkFanatic	07/26/06 05:48 PM
Re: Brake Job Q's	Jeffstoyo	07/26/06 07:40 PM
Re: Brake Job Q's	4Crawler	07/26/06 07:54 PM
Re: Brake Job Q's	RatLabGuy	07/27/06 01:07 AM
Re: Brake Job Q's	kewlynx	07/27/06 04:01 AM
Re: Brake Job Q's	RatLabGuy	07/27/06 05:32 PM
Re: Brake Job Q's	HawkFanatic	07/27/06 05:33 PM
Re: Brake Job Q's	Jeffstoyo	07/27/06 11:06 PM
Re: Brake Job Q's	Anonymous	07/28/06 01:32 AM
Re: Brake Job Q's	missouriman	07/28/06 02:06 AM
Re: Brake Job Q's	eightyeight	07/28/06 04:14 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 7.197s Queries: 15 (3.472s) Memory: 0.6148 MB (Peak: 0.6478 MB) Data Comp: Off Server Time: 2026-06-24 08:59:14 UTC
Valid HTML 5 and Valid CSS