interference or no?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: interference or no? [Re: Paddler] #740524 07/28/06 03:20 AM

Joined: May 2002

Posts: 1,541

CleveTown

jezeric

Isuzu Moderator

If it's an interference motor and the belt goes, you're probably looking at at least a bent valve or two. Worst case scenario will get you broken valves and piston or cylinder wall damage, but it's not a given. Minimum of a head job though, I'd say.

James

Entire Thread
Subject	Posted By	Posted
interference or no?	mike_dup1	07/26/06 09:38 PM
Re: interference or no?	onebadtrooper	07/27/06 12:01 AM
Re: interference or no?	mike_dup1	07/27/06 12:33 AM
Re: interference or no?	onebadtrooper	07/27/06 12:58 AM
Re: interference or no?	JLEMOND	07/27/06 01:41 AM
Re: interference or no?	mike_dup1	07/27/06 02:55 AM
Re: interference or no?	Paddler	07/28/06 02:55 AM
Re: interference or no?	jezeric	07/28/06 03:20 AM
Re: interference or no?	mlclark	07/28/06 05:35 PM
Re: interference or no?	JLEMOND	07/28/06 11:02 PM
Re: interference or no?	Wayne	07/27/06 01:34 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.795s Queries: 16 (3.793s) Memory: 0.6146 MB (Peak: 0.6476 MB) Data Comp: Off Server Time: 2026-07-15 12:41:41 UTC
Valid HTML 5 and Valid CSS