Fittings for a R134a conversion on a 4ze1 1989 trooper.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Fittings for a R134a conversion on a 4ze1 1989 trooper. #740666 07/27/06 08:27 AM

Joined: May 2004

Posts: 515

Illinois, USA

thepcguy

Rock Warrior

Hello, I did a quick search and was unable to find the info I was looking for. If any of you have performed the switch, do you happen to have the part numbers of the fittings you used and where you purchased them? On the drivers side fitting, has anyone seen a fitting with a 90 degree bend to make it easier to access? Eitherway, if someone can point me in the right direction, I'd really appreciate it. Thankyou.

- Jim

1989 Isuzu Trooper II
- 2.6L 4ze1 Motor
- BFGoodrich 235/75/15 AT

Entire Thread
Subject	Posted By	Posted
Fittings for a R134a conversion on a 4ze1 1989 trooper.	thepcguy	07/27/06 08:27 AM
Re: Fittings for a R134a conversion on a 4ze1 1989 trooper.	Fujisawa_Rob	07/27/06 01:32 PM
Re: Fittings for a R134a conversion on a 4ze1 1989 trooper.	thepcguy	07/27/06 04:05 PM
Re: Fittings for a R134a conversion on a 4ze1 1989 trooper.	Fujisawa_Rob	07/27/06 09:31 PM
Re: Fittings for a R134a conversion on a 4ze1 1989 trooper.	thepcguy	07/27/06 10:15 PM
Never had good luck converting	Strider93	08/03/06 12:37 PM
Re: Never had good luck converting	maxwell417	08/04/06 05:21 AM
Re: Never had good luck converting	NATO308	08/04/06 05:50 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social: