Fittings for a R134a conversion on a 4ze1 1989 trooper.

Print Thread

Rate Thread

Re: Fittings for a R134a conversion on a 4ze1 1989 trooper. [Re: Fujisawa_Rob] #740668 07/27/06 04:05 PM

Joined: May 2004

Posts: 515

Rock Warrior

Thanks for the reply. If and when I find the fittings, I'll be making sure I put up all info I find. Here's a few pictures. Jerry Lemond is searching for me as we speak. Here are some pictures circling the valves that I believe I need. Does this look right to everyone? Thanks for your time.

http://thepcguy.myvnc.com/jim/ac/P6170012.JPG
http://thepcguy.myvnc.com/jim/ac/P6170013.JPG
http://thepcguy.myvnc.com/jim/ac/P6170014.JPG
http://thepcguy.myvnc.com/jim/ac/P6170015.JPG
http://thepcguy.myvnc.com/jim/ac/P6170016.JPG
http://thepcguy.myvnc.com/jim/ac/P6170021.JPG

- Jim

1989 Isuzu Trooper II
- 2.6L 4ze1 Motor
- BFGoodrich 235/75/15 AT

Entire Thread
Subject	Posted By	Posted
Fittings for a R134a conversion on a 4ze1 1989 trooper.	thepcguy	07/27/06 08:27 AM
Re: Fittings for a R134a conversion on a 4ze1 1989 trooper.	Fujisawa_Rob	07/27/06 01:32 PM
Re: Fittings for a R134a conversion on a 4ze1 1989 trooper.	thepcguy	07/27/06 04:05 PM
Re: Fittings for a R134a conversion on a 4ze1 1989 trooper.	Fujisawa_Rob	07/27/06 09:31 PM
Re: Fittings for a R134a conversion on a 4ze1 1989 trooper.	thepcguy	07/27/06 10:15 PM
Never had good luck converting	Strider93	08/03/06 12:37 PM
Re: Never had good luck converting	maxwell417	08/04/06 05:21 AM
Re: Never had good luck converting	NATO308	08/04/06 05:50 AM

Hop To