Catalytic converter going bad?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Catalytic converter going bad? [Re: DirtCheap] #740942 07/28/06 05:05 PM

Anonymous

Unregistered

There are no codes. And I will need to grind or cut the stock catalytic converter bolts since they are no longer hex shaped due to rust. I plan on pulling the cat this weekend to see what shape it's in and if it looks bad I'll gut it until I can get to the exhaust shop.

Entire Thread
Subject	Posted By	Posted
Catalytic converter going bad?	Anonymous	07/28/06 02:55 PM
Re: Catalytic converter going bad?	trythis	07/28/06 03:37 PM
Re: Catalytic converter going bad?	DirtCheap	07/28/06 03:56 PM
Re: Catalytic converter going bad?	Anonymous	07/28/06 05:05 PM
Re: Catalytic converter going bad?	1986xtracab	07/28/06 06:30 PM
Re: Catalytic converter going bad?	trythis	07/29/06 01:22 AM
Re: Catalytic converter going bad?	Anonymous	07/30/06 03:19 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.011s Queries: 16 (4.008s) Memory: 0.6004 MB (Peak: 0.6334 MB) Data Comp: Off Server Time: 2026-11-05 08:04:24 UTC
Valid HTML 5 and Valid CSS