Quote
found another burnt relay next to the driver side kick panel....going to go get another one.
I will look at the link you posted later on tonight....from what you say that is understanding...I just don't know why axillary switch has power and one more click forward on the ignition switch I get nothing...no power.
Mike


It may be that the contacts in the ignition switch for the ON position are burnt out, while the ACC and START contacts are intact. If the short occured while the truck was running, then the ignition would have been in the ON position and those contacts could have seen the high current and fried.

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code