howlin

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

howlin #741352 07/30/06 06:03 AM

Joined: Dec 2004

Posts: 143

Terrace, BC

salvo

Wheeler

about a month ago i replaced the crush sleve and seal on my rear 3rd, it was fine before except for leaking oil, and it was fine up untill a few days ago... now under torque the rear seems to have a hummmm/howel to it? if im coasting it goes away? The gears were set up properly and backlash and all was good when i put it back in

Last edited by salvo; 07/30/06 06:04 AM.

Entire Thread
Subject	Posted By	Posted
howlin	salvo	07/30/06 06:03 AM
Re: howlin	Brian894X4	07/30/06 09:50 AM
Re: howlin	salvo	07/30/06 05:01 PM
Re: howlin	Stevie	07/30/06 06:27 PM
Re: howlin	brentox	07/31/06 02:42 AM
Re: howlin	salvo	07/31/06 04:37 AM
Re: howlin	salvo	08/07/06 12:51 AM
Re: howlin	GOI87	08/07/06 06:24 AM
Re: howlin	salvo	08/07/06 07:16 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.648s Queries: 15 (3.645s) Memory: 0.6103 MB (Peak: 0.6433 MB) Data Comp: Off Server Time: 2026-07-13 18:15:56 UTC
Valid HTML 5 and Valid CSS