Installing a 3

Print Thread

Rate Thread

Re: Installing a 3" SL [Re: Gizzy42] #741647 08/01/06 08:55 PM

Joined: Sep 2002

Posts: 1,873

Walnut Creek, CA

holger

Body Damage is Cool

The UCA they sent to me for my 2002 Rodeo were perfect in terms of fitment and quality. I am reading a lot of bad words about Calmini here on this board, but I have to say that the product I bought (the arms) and the service were just perfect. I received the arms just two days after I ordered them. Not many aftermarket Isuzu suppliers can do this.

They also included new steel brake lines into the shipment.

Oleg
Axiom 4WD 2004: OME shocks, 32" BFG Mudders, RockSliderz, OME929+2" spacers, Stinkyfab bent RE rear links, front ARB locker, rear No-Slip locker, DOR front axle lowering kit, custom middle section skid plate, IronMan torsion bars.
Deceased Rodeo'02 4WD.

Entire Thread
Subject	Posted By	Posted
Installing a 3" SL	m_a_b	07/31/06 08:16 PM
Re: Installing a 3" SL	Bigpoppax2	07/31/06 08:26 PM
Re: Installing a 3" SL	m_a_b	07/31/06 08:42 PM
Re: Installing a 3" SL	Smiley	07/31/06 09:16 PM
Re: Installing a 3" SL	Isuzukid	08/01/06 05:20 AM
Re: Installing a 3" SL	Bigpoppax2	08/01/06 03:14 PM
Re: Installing a 3" SL	Isuzukid	08/01/06 06:29 PM
Re: Installing a 3" SL	m_a_b	08/01/06 07:11 PM
Re: Installing a 3" SL	m_a_b	08/01/06 06:47 PM
Re: Installing a 3" SL	Gizzy42	08/01/06 08:21 PM
Re: Installing a 3" SL	holger	08/01/06 08:55 PM
Re: Installing a 3" SL	pplotz	08/02/06 12:12 AM
Re: Installing a 3" SL	MountaineerIsuzu1	08/02/06 02:11 AM
Re: Installing a 3" SL	m_a_b	08/03/06 02:08 AM
Re: Installing a 3" SL	Bigpoppax2	08/03/06 01:22 PM
Re: Installing a 3" SL	m_a_b	08/04/06 01:06 PM
Re: Installing a 3" SL	Starchild	08/04/06 01:47 PM
Re: Installing a 3" SL	Bigpoppax2	08/04/06 02:45 PM
Re: Installing a 3" SL	m_a_b	08/04/06 03:00 PM
Re: Installing a 3" SL	m_a_b	08/05/06 02:32 AM
Re: Installing a 3" SL	Bigpoppax2	08/05/06 07:37 PM
Re: Installing a 3" SL	CPOM	08/06/06 01:17 AM
Re: Installing a 3" SL	JLEMOND	08/06/06 02:30 AM
Re: Installing a 3" SL	m_a_b	08/06/06 05:22 AM
Re: Installing a 3" SL	Smiley	08/06/06 07:04 AM
Re: Installing a 3" SL	m_a_b	08/06/06 06:35 PM
Re: Installing a 3" SL	Bigpoppax2	08/06/06 09:54 PM
Re: Installing a 3" SL	m_a_b	08/06/06 11:20 PM
Re: Installing a 3" SL	MountaineerIsuzu1	08/07/06 01:56 AM
Re: Installing a 3" SL	m_a_b	08/07/06 02:07 AM
Re: Installing a 3" SL	Idaho_Trooper	08/07/06 06:01 AM
Re: Installing a 3" SL	m_a_b	08/07/06 12:36 PM
Re: Installing a 3" SL	Bigpoppax2	08/07/06 01:01 PM
Re: Installing a 3" SL	m_a_b	08/08/06 01:27 AM
Re: Installing a 3" SL	TrooperJ	08/08/06 01:33 AM
Re: Installing a 3" SL	Idaho_Trooper	08/08/06 06:03 AM
Re: Installing a 3" SL	Smiley	08/08/06 07:08 AM
Re: Installing a 3" SL	chasespeed	08/08/06 10:39 AM
Re: Installing a 3" SL	m_a_b	08/08/06 11:34 AM
Re: Installing a 3" SL	m_a_b	08/08/06 11:42 AM
Re: Installing a 3" SL	Isuzukid	08/08/06 09:32 PM
Re: Installing a 3" SL	m_a_b	08/09/06 12:06 PM
Re: Installing a 3" SL	TrailMystic	08/01/06 02:45 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social: