|
|
|
|
 Re: Installing a 3" SL
[Re: m_a_b]
#741676
08/08/06 11:42 AM
|
Joined: Sep 2004
Posts: 100
OP
Wheeler
|
by the way, I just realized that on the equations at the bottom, there should either be a square root over the whole left side, or the right side should be squared. I did the calculations right, I just didn't write down the equations right...
'99 Isuzu Amigo S, 3.2L 4x4 softtop, 3" Calmini Lift, Indy4x Custom Bumpers & Sliders
|
|
|
Re: Installing a 3" SL
[Re: m_a_b]
#741677
08/08/06 09:32 PM
|
Joined: Apr 2001
Posts: 589
Rock Warrior
|
They are quick to ship out another set to you, But the new set will be no help. You will run into the same problems like I did. ALL of their UCAs are a bit off. I had the same problem with my second set and just gave up. Sold them for $150 to salvage what I can, and left my stock UCA's on.
|
|
|
Re: Installing a 3" SL
[Re: Isuzukid]
#741678
08/09/06 12:06 PM
|
Joined: Sep 2004
Posts: 100
OP
Wheeler
|
Did you have this same problem, or were your UCA's out of dimension in another way?
'99 Isuzu Amigo S, 3.2L 4x4 softtop, 3" Calmini Lift, Indy4x Custom Bumpers & Sliders
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.008s Queries: 16 (0.005s) Memory: 0.6018 MB (Peak: 0.6721 MB) Data Comp: Off Server Time: 2026-06-11 15:42:27 UTCValid HTML 5 and Valid CSS 
