Wobbly CV Joint

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Wobbly CV Joint [Re: kewlynx] #742457 08/09/06 01:40 AM

Joined: Feb 2000

Posts: 456

dknight

Mudrunner

Sounds to me like the spindle bushings are worn.
see
http://www.yotatech.com/~corey/tech/jimrockford_spindle/jimrockford.htm

For instructions on how to replace these bushings with bearings. For a short term fix you can put some grease between the CV shaft and spindle bushings.

Entire Thread
Subject	Posted By	Posted
Wobbly CV Joint	creeve4	08/04/06 01:34 AM
Re: Wobbly CV Joint	kewlynx	08/04/06 04:34 AM
Re: Wobbly CV Joint	creeve4	08/04/06 05:35 AM
Re: Wobbly CV Joint	kewlynx	08/04/06 05:56 AM
Re: Wobbly CV Joint	dknight	08/09/06 01:40 AM
Re: Wobbly CV Joint	TNToy	08/12/06 04:49 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.211s Queries: 16 (4.209s) Memory: 0.6019 MB (Peak: 0.6348 MB) Data Comp: Off Server Time: 2026-10-30 11:49:44 UTC
Valid HTML 5 and Valid CSS