Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
speedometer cable #742545 08/04/06 06:44 AM
Joined: Feb 2006
Posts: 29
L
lostone Offline OP
Getting the Wheeling Fever
my crossover pipe for my headders came loose and burned a hole in my speedo cable causing it to come apart. where can I get a new cable and housing assembly?

second, where is the fill plug on the r150 transmission?

Re: speedometer cable [Re: lostone] #742546 08/04/06 07:42 AM
Joined: Oct 2002
Posts: 15,887
kewlynx Offline
Toyota & Classifieds Moderator
*****
www.1sttoyotaparts.com stuff in red-n-white boxes

www.car-part.com junkyardin'


http://www.walkablecommunities.org/

Democracy is two wolves and a lamb voting on what to have for dinner. Liberty is a well-armed lamb contesting the vote.

**ubi apis- ibi salus**
Re: speedometer cable [Re: lostone] #742547 08/04/06 01:19 PM
Joined: Apr 2006
Posts: 55
1
10_35lookoutbelow Offline
Getting the Wheeling Fever
where is the fill plug on the r150 transmission?

It is on the drivers side of the transmission, drain is on the passenger side.


Theresa the Toyota Terror-89 Toyota P/U (3.0L SR5, 5sp swapped in from auto, 3"B.L., 32X11.5X15 MT/R, 2.5" stainless magnaflow catback exhaust, leaky floor with cold draft @feet, FUBAR comptron now in glovebox)
Re: speedometer cable [Re: 10_35lookoutbelow] #742548 08/07/06 01:27 AM
Joined: Jun 2005
Posts: 369
toyotaguy55 Offline
Mudrunner
the fill location will be a ***** to get to without a poer filler so i pull the fill plug and thenpull the shifters and slowly add fluid utill it drips out the fill plug hole <img src="/forums/images/graemlins/kewl.gif" alt="" />


toyotas look good with body damage
Re: speedometer cable [Re: toyotaguy55] #742549 08/07/06 02:42 AM
Joined: Jun 2006
Posts: 25
G
GreyDuck Offline
Getting the Wheeling Fever
I've used a little drill pump like this one to fill my W56 tranny and it worked well. I bought mine a Menards for about $4 if I remember correctly and I got some poly tubing that fits tightly into the in/out holes on the pump.

http://www.hardwarestore.com/pop-print/larger-image.aspx?prodNo=2037


1990 Truck 4X4 5sp 22re


Moderated by  4Crawler, 4x4Wire, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 1.173s Queries: 15 (0.003s) Memory: 0.6046 MB (Peak: 0.6684 MB) Data Comp: Off Server Time: 2026-06-07 04:02:57 UTC
Valid HTML 5 and Valid CSS