|
|
|
|
 Re: 4.88 gearing
[Re: Brett823]
#742618
08/08/06 10:31 PM
|
Joined: Oct 2000
Posts: 669
Rock Warrior
|
4.88s are a bit tall for 35"s and a relatively stock 22R-series motor. Running a supercharger, I could turn 35s just fine, but I wouldn't try it with a *normal* 22r-22re.
Go with 5.29s. Buy the gears and have them installed - check pirate4x4 for install/gear specials.
22REturbo.net 1988 4Runner 22RTE core, turbocharged, megasquirted...
|
|
|
Re: 4.88 gearing
[Re: abnormaltoy]
#742619
08/09/06 02:23 AM
|
Joined: Sep 2005
Posts: 970
Rock Warrior
|
Any one know a good place to snag a pair of third-member in 4.88. And how well will 4.88 turn 35" tires? Thanks Brett Are you talking about the factory 4.88's? 'cause knowing what I know now...I wouldn't have gotten mine. I would just change the gears in the 3rds you have now or buy v6 or HP 3rds. Could you elaborate/explain please?
With 200+ Billion electrical parts, the world most complicated machine is inside your own skull.
Question Reality.
-----------------------------
'89 Rnr DLX "SR4.5", 32s w/ 5.29 locked f/r blah blah
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.006s Queries: 16 (0.004s) Memory: 0.5934 MB (Peak: 0.6583 MB) Data Comp: Off Server Time: 2026-06-21 11:18:27 UTCValid HTML 5 and Valid CSS